ESCO occupation
Metal planer operator
Metal planer operators set up and operate a planer, which is a metalworking machine designed to cut excess material from a metal workpiece using linear relative motion between the planer's cutting tool and the workpiece in order to create a linear toolpath and cut.
- U.S. median pay for the matching O*NET occupation
- $65,670 a year
- Projected U.S. jobs
- +5.9% by 2035
For Computer Numerically Controlled Tool Programmers (51-9162.00), from the ESCO–O*NET crosswalk. BLS, May 2024 national estimates. Details and sources
Top skills: consult technical resources, dispose of cutting waste material, ensure equipment availability, measure flatness of a surface, monitor automated machines
Hiring for this role? Map this role in your org chart, free →
Compare with another occupationCompare with Screw machine operator
Duties and responsibilities
Tasks O*NET records for Computer Numerically Controlled Tool Programmers (51-9162.00), this occupation's close match in the official ESCO–O*NET crosswalk:
- Determine the sequence of machine operations, and select the proper cutting tools needed to machine workpieces into the desired shapes.
- Analyze job orders, drawings, blueprints, specifications, printed circuit board pattern films, and design data to calculate dimensions, tool selection, machine speeds, and feed rates.
- Observe machines on trial runs or conduct computer simulations to ensure that programs and machinery will function properly and produce items that meet specifications.
- Write programs in the language of a machine's controller and store programs on media, such as punch tapes, magnetic tapes, or disks.
- Determine reference points, machine cutting paths, or hole locations, and compute angular and linear dimensions, radii, and curvatures.
- Revise programs or tapes to eliminate errors, and retest programs to check that problems have been solved.
All 16 tasks for Computer Numerically Controlled Tool Programmers
U.S. pay and outlook for the matching O*NET occupation
ESCO publishes no pay. These are U.S. figures for Computer Numerically Controlled Tool Programmers (51-9162.00), this occupation's exact or close match in the official ESCO–O*NET crosswalk. Pay in Europe differs.
- Median annual wage (U.S.)
- $65,670
- Employment (U.S.)
- 28,230
- Projected employment change, 2025–2035
- +5.9%, faster than the 3.5% for all occupations
Source: U.S. Bureau of Labor Statistics, Occupational Employment and Wage Statistics, May 2024 national estimates and Employment Projections 2025–2035, for SOC 51-9162 (Computer Numerically Controlled Tool Programmers). Pay varies by location, employer and experience.
Job Zone
- 1
- 2
- 3
- 4
- 5
Zone 2: Some Preparation Needed
Some preparation. Usually a high school diploma, some previous work-related skill or experience, and a few months to a year of training with experienced workers.
Job Zone is O*NET's rating of how much education, experience and training an occupation typically needs — a property of the work, not of anyone doing it.
Occupational interest profile
CRIConventional · Realistic · Investigative — the three strongest interests, in order
- C Conventional5.92
- R Realistic4.88
- I Investigative3.62
- E Enterprising1.68
- A Artistic1.53
- S Social1.45
RIASEC (Holland) interests on O*NET's 0–7 scale: what the work draws on, not what any individual prefers. Hover a row for what each dimension means.
Job Zone and interest data are borrowed from Computer Numerically Controlled Tool Programmers (51-9162.00): in the official ESCO–O*NET crosswalk, its close O*NET match, and the best-ranked match that has them. ESCO doesn't publish them directly.
Typically associated skills
Essential (18)
ESCO's essential and optional tags describe how its taxonomy relates a skill to this occupation. They are not the essential functions of a job under the ADA, which an employer determines for its own role.
- consult technical resources
- dispose of cutting waste material
- ensure equipment availability
- measure flatness of a surface
- monitor automated machines
- monitor moving workpiece in a machine
- operate metal sheet shaker
- perform test run
- quality and cycle time optimisation
- quality standards
Show all 18 essential skills
Optional (18)
- advise on machinery malfunctions
- apply cross-reference tools for product identification
- cutting technologies
- ferrous metal processing
- inspect quality of products
- manufacturing of heating equipment
- manufacturing of metal containers
- manufacturing of weapons and ammunition
- mark processed workpiece
- monitor conveyor belt
- operate lifting equipment
- operate manual planer
- operate scrap vibratory feeder
- perform machine maintenance
- perform product testing
- record production data for quality control
- replace machines
- smooth burred surfaces
Related ASVAB line scores
The work leans most on the content of the Army CL (Clerical), GT (General Technical), FA (Field Artillery) line scores.
Based on the O*NET profile of Computer Numerically Controlled Tool Programmers, this occupation's O*NET match.
| Line score | ASVAB areas | Relevance (1–5) |
|---|---|---|
| CL (Clerical) | VE + AR + MK | 3.5 |
| GT (General Technical) | VE + AR | 3.5 |
| FA (Field Artillery) | AR + MK + MC | 3.4 |
| CO (Combat) | AR + AS + MC | 3.2 |
| SC (Surveillance and Communications) | VE + AR + AS + MC | 3.2 |
How this is worked out: Each ASVAB area the Army composites add up is tied to the O*NET abilities and knowledge areas that cover the same content. An area scores the average O*NET importance (1 to 5) of those ratings for this occupation, and a line score scores the average of its areas. Line scores at O*NET’s “important” level (3) or higher, at most three, are listed as related.
This shows which tested content the civilian work draws on. It is not a qualification standard and implies no score requirement; military jobs set their own, and they change. Confirm with a recruiter.
2030 skills profile
What this isHow much this occupation leans on each of the 13 core skills the World Economic Forum's Future of Jobs Report 2025 expects to grow by 2030, from 0 to 100, read from its O*NET ratings (through its closest O*NET occupation, Computer Numerically Controlled Tool Programmers). It describes the occupation, not any person in it.
| Skill | Bar | Score |
|---|---|---|
| Motivation and self-awareness (proxy) | 65 | |
| AI and big data | 63 | |
| Technological literacy | 61 | |
| Creative thinking | 53 | |
| Curiosity and lifelong learning | 53 | |
| Resilience, flexibility and agility (proxy) | 53 | |
| Systems thinking | 52 | |
| Analytical thinking | 50 | |
| Empathy and active listening | 43 | |
| Leadership and social influence | 38 | |
| Resource management and operations | 30 | |
| Service orientation and customer service | 29 | |
| Talent management | 29 |
How each score is built
- AI and big data: Programming 3.8, Mathematics 3.1, Mathematical Reasoning 3.5, Analyzing Data or Information 3.3, Computers and Electronics 3.8
- Technological literacy: Working with Computers 4.8, Computers and Electronics 3.8, Technology Design 2.1, Troubleshooting 3.0
- Curiosity and lifelong learning: Active Learning 2.9, Learning Strategies 2.6, Updating and Using Relevant Knowledge 3.8
- Creative thinking: Originality 2.8, Fluency of Ideas 2.9, Thinking Creatively 3.7
- Talent management: Management of Personnel Resources 2.1, Coaching and Developing Others 2.7, Staffing Organizational Units 1.3, Developing and Building Teams 2.5, Personnel and Human Resources 2.1
- Systems thinking: Systems Analysis 3.1, Systems Evaluation 3.0, Complex Problem Solving 3.1
- Motivation and self-awareness: Monitoring 3.5, Time Management 3.0, Determine Tasks, Priorities and Goals 4.0, Freedom to Make Decisions 3.9
- Resilience, flexibility and agility: Category Flexibility 3.1, Time Pressure 4.2, Conflict Situations 2.6, Dealing With Unpleasant, Angry, or Discourteous People 2.5
- Leadership and social influence: Persuasion 2.0, Coordination 2.8, Guiding, Directing, and Motivating Subordinates 2.4, Selling or Influencing Others 2.0, Coordinate or Lead Others in Accomplishing Work Activities 3.3
- Analytical thinking: Critical Thinking 3.0, Judgment and Decision Making 3.0, Deductive Reasoning 3.0, Inductive Reasoning 3.0
- Empathy and active listening: Active Listening 3.0, Social Perceptiveness 2.6, Assisting and Caring for Others 2.6
- Service orientation and customer service: Service Orientation 2.0, Customer and Personal Service 2.5, Performing for or Working Directly with the Public 2.0, Deal With External Customers or the Public in General 2.2
- Resource management and operations: Management of Financial Resources 1.8, Management of Material Resources 1.8, Operations Analysis 2.9, Monitoring and Controlling Resources 2.3
Each rating is O*NET's 1 to 5 importance or work context value, put on 0 to 100 and averaged. Read the method and its limits, or profile a whole team.
O*NET equivalents
From the official ESCO–O*NET crosswalk, strongest match first. A broader occupation takes in this one; a narrower one is a part of it.
Closest occupations
Compare any occupation →ESCO occupations that share the most of this occupation's 18 essential skills. A plain count, not a hidden score.
Screw machine operator
13 shared · 5 more of its ownmonitor moving workpiece in a machine, dispose of cutting waste material, quality and cycle time optimisation, supply machine with appropriate tools
ESCO · Compare
Deburring machine operator
13 shared · 7 more of its ownmonitor moving workpiece in a machine, dispose of cutting waste material, quality and cycle time optimisation, supply machine with appropriate tools
ESCO · Compare
Laser cutting machine operator
13 shared · 14 more of its owndispose of cutting waste material, quality and cycle time optimisation, supply machine with appropriate tools, remove inadequate workpieces
ESCO · Compare
Engraving machine operator
13 shared · 16 more of its owndispose of cutting waste material, quality and cycle time optimisation, supply machine with appropriate tools, remove inadequate workpieces
ESCO · Compare
Milling machine operator
12 shared · 10 more of its owndispose of cutting waste material, quality and cycle time optimisation, remove inadequate workpieces, remove processed workpiece
ESCO · Compare
Grinding machine operator
12 shared · 14 more of its owndispose of cutting waste material, quality and cycle time optimisation, remove inadequate workpieces, remove processed workpiece
ESCO · Compare
Straightening machine operator
11 shared · 3 more of its ownmeasure flatness of a surface, remove inadequate workpieces, remove processed workpiece, types of metal
ESCO · Compare
Metal drawing machine operator
11 shared · 4 more of its ownmonitor moving workpiece in a machine, quality and cycle time optimisation, remove inadequate workpieces, remove processed workpiece
ESCO · Compare
Use this in your own job architecture
BlissPoint Organization Viewer can link a role directly to this occupation and suggest these skills as that role's starting requirements.
Questions
- What does a metal planer operator do?
- Metal planer operators set up and operate a planer, which is a metalworking machine designed to cut excess material from a metal workpiece using linear relative motion between the planer's cutting tool and the workpiece in order to create a linear toolpath and cut. Top skills: consult technical resources, dispose of cutting waste material, ensure equipment availability, measure flatness of a surface, monitor automated machines.
- How much does a metal planer operator make?
- In the U.S., the closest U.S. occupation, Computer Numerically Controlled Tool Programmers, pays a median of $65,670 a year (BLS, May 2024 national estimates). Projected jobs: +5.9% by 2035.
- How do you become a metal planer operator?
- Some preparation. Usually a high school diploma, some previous work-related skill or experience, and a few months to a year of training with experienced workers.
This page includes information from the O*NET 31.0 Database by the U.S. Department of Labor, Employment and Training Administration (USDOL/ETA), used under the CC BY 4.0 license; O*NET® is a trademark of USDOL/ETA. ESCO occupations and skills are from the European Commission's ESCO classification, and the occupation crosswalk is the official ESCO–O*NET mapping by the ESCO Secretariat with USDOL/ETA. This service uses the ESCO classification of the European Commission. BlissPoint Analytics has modified all or some of this information: skill, task and descriptor ratings are rounded to one decimal, and ESCO occupations show Job Zone and interests copied from a crosswalked O*NET occupation. USDOL/ETA has not approved, endorsed, or tested these modifications.